Controls : Sensors & Accessories

• Submersible Large Diaphragm Sensors
• Moisture Sensor
• Alternator
• Circuit Breaker
• Condensation Heater
• General Purpose Relay
• IEC Contactor
• Intrinsically Safe Relay
• NEMA Rated Starter
• Narrow Angle Float Switches

Sensors & Accessories : Submersible Large Diaphragm Sensors

Submersible large Diaphragm Low Pressure Sensors reliably monitor liquid levels over factory calibrated ranges and produce 4 - 20 mA signals proportional to the sensed depth.

Sensors & Accessories : Moisture Sensor

A moisture sensing relay installed in the panel for interfacing with moisture probe in pump motor. When the moisture probe senses the presence of moisture in the oil seal chamber indicating seal chamber indicating seal failure, the relay is energized and activates a light mounted on the inner door.

Sensors & Accessories : Alternator

A solid state alternating relay to automatically alternate the starting sequence of the pumps on each pumping cycle, thus assuring equal operating time and wear on each pump. Contact Rating: 10 amps @ 120 V.A.C.

Sensors & Accessories : Circuit Breaker

Thermal magnetic interrupting device that offers motor protection against high fault current from the utility power line.
fig.1- 230v - 2 or 3 pole
fig.2- 480v - 3 pole

A 100 watt thermostatically controlled strip heater mounted in the panel for retardation of condensation and to prevent freezing of electrical components.

Sensors & Accessories : General Purpose Relay

The general purpose relay is used as a switching device to perform a logic sequencing function.

Sensors & Accessories : IEC Contactor

Horsepower rated for 500,000 mechanical operations

Sensors & Accessories : Intrinsically Safe Relay

The low current isolated switches are used to provide intrinsically safe switching levels in hazardous environments. This solid state design reduces the current so it is incapable of releasing sufficient energy to ignite explosive gases in the wet well.

Sensors & Accessories : Narrow Angle Float Switches

• Reliable steel tube mercury switch design
• Replaces air bubble systems, diaphragm switches & electrode systems
• Maximum dependability
• Designed for over one million operations
• Most economical